Description of correct debugging method for newly bought single needle computer quilting machine

1. Quilting machine power test, first plug the power to the quilting machine, and check whether the power supply is normal, the general voltage is 220 v±10%, and then turn on the host switch, after the host is powered on, the indicator light is on, the display will also display the quilting parameter operation interface. 2. State test, the display displays the parameter operation interface, we can see a small red cross point in the upper left corner or upper right corner of the pattern, which represents the position of the needle point. You can test the functions of the keyboard and the host computer on the keyboard (Note: Do not turn on the power on the motor). 3. Motor and sensor test, first we push the girder and the nose to the middle of the quilting machine, then click the green power button to observe whether the stepping motor is powered on, and click the F9 system test on the keyboard, use the keyboard (←)(→)(↑)(↓)Before and after the key test girder (Longitudinal)Movement, about the handpiece (Horizontal) Movement, to ensure that the direction on the keyboard is consistent with the movement direction of the girder handpiece, such as press (←)Key head whether left go (↓)Whether the key girder moves downward. On the contrary, if it is necessary to adjust the power lines from the corresponding stepping motor to the driver in the electric cabinet, it is OK to change the direction of the three power lines connected to the stepping motor on the corresponding driver. If the longitudinal and transverse directions are opposite (Such as press (→)Go with the key beam, Press (↑)Head go) , Exchange the signal plugs on the two drives with each other. After the longitudinal and lateral alignment, press F9 to test the steering of the handpiece ( It is the synchronous wheel rotating counterclockwise on the right side of the machine to observe the machine. If the direction is reversed, change any two of the three power lines on the three-phase motor of the inverter, and the direction can be changed. At this point, the direction, signal and function of the three motors are normal.

Foshan City Kehua Smart Quilting Equipment Co.,Ltd. in the right situation can streamline the entire process, enabling your team to deliver higher quality work in a shorter amount of time.

Our mission is to operate the best specialty retail business in domestic, regardless of the product we sell. Because the product we sell is machine quilting service, our aspirations must be consistent with the promise and the ideals of the volumes which line our manufacture.

The industrial quilting machine machine quilting stitches is an all-servo system capable of storing hundreds of computerized quilting machines process parameters to provide custom sewing machine for quilting and embroidery profiles for each quilting sewing machine recommendation type and industrial quilting machine configuration.

If our brand is successful and consistent, it will be much easier to initially grab customers and encourage them to purchase home machine quilting further.